现场双面动平衡在离心式多级叶轮风机上的应用

对离心式多级叶轮风机进行振动频谱分析，认为叶轮存在动不平衡，造成风机振动超标，采用现场双面动平奢技术消除了风机转轴动不平衡。     

Ԥ���������ز����ʵķ���

本文根据物质平衡原理,对于定容和水驱凝析气藏提出了预测采收率的方法,并提出了凝析气藏的总采收率与干气和凝析油采收率的关系式。     

关于电视群信号对光纤副载波调频传输中的信噪比平衡问题的分析

本文对微波副载波用电视群信号调频的光纤传输中的信噪比平衡问题进行了分析,推导出VSB-AM信号在解调后的信噪比表达式,引入了信噪比恶化系数的概念.为了实现多路VSB-AM信号间的信噪比的平衡,相应的微波副载波频偏应有确定的比例关系.     

玻璃钢管道的特点,设计原理及选用时的注意事项

本文旨在通过对玻璃钢管道及其标准的发展历史、产品特点、基本设计原理、质量影响因素及选用时应注意的事项等方面的介绍，使用户与工程设计人员对该产品有一个比较全面的了解，以便更好地选用并受益于这种管材。     

上下行信号平衡与蜂窝小区设计

本文从无线电通信基本要素出发 ,阐述上行信号和下行信号的无线传播 ,得出上下行信号平衡链路方程 ,并以我国普遍使用的TACS系统和GSM系统为例 ,着重讨论了信号平衡与蜂窝小区设计之间的关系。     

CAD OF MILLIMETER WAVE OSCILLATORS WITH THE FDHB TECHNIQUE

In this paper the modelling, analysis and optimization of millimeter wave oscillatorsare investigated by using the a frequency-domain harmonic balance technique (FDHB), where theexternal-circuit impedances looking outside from the active device are calculated with a combinedtechnique of modes expansion, Galerkin, and collocation methods. The optimization results arein agreement with the experimental ones, which show the reliability of the presented model andoptimization.     

An investigation of pore cracking in titanium welds

Two welded Ti-6A1-4V pressure vessels leaked prematurely in service. The leaks were caused by cracks emanating from weld porosity. The cracks originated during fabrication, with subsequent growth in service leading to the formation of the leak paths. Pore cracking is thought to be caused by a mechanism that involves both sustained-load and cyclic contributions, with the former being the more prominent. It is shown that the tendency for cracking is influenced by pore position and that pore size is not a deciding factor in that regard. The factors that govern pore cracking are discussed, and the possible role of interstitial embrittlement is assessed.     

The chloride stress-corrosion cracking behavior of stainless steels under different test methods

Chloride-induced stress-corrosion cracking (SCC) is one of the failure modes of stainless steels. Highly alloyed austenitic stainless steels S32654, S31254, and N08028, and duplex grades S32750 and S31803 possess much improved resistance to SCC compared with S30400 and S31600 steels. With the development of a database, SSData, experimental data collected from calcium chloride tests, autoclave tests, and drop evaporation tests were evaluated. Stress-corrosion cracking data generated by autoclave tests agreed well with the practical service conditions and can be used to discriminate alloys for SCC resistance in sodium chloride solution. Drop evaporation test data can be used in situations where evaporation may occur and cyclic loading may be involved. The SCC resistance of alloys under each method increased with increasing molybdenum equivalent Mo + 0.25Cr + 0.1Ni. For a given alloy, the testing result depends on the stress state and environment; different test methods can give different ranking orders concerning SCC resistance. The performance of duplex stainless steels in a chloride-containing environment at higher temperatures was not as good as expected when dynamic loading was involved.     

微机核子秤在大型尿素装置中的应用

介绍了大型尿素装置中微机核子秤的系统构成，测量原理、安装、调校及在调试过程中发现的问题。